Table of Contents
Advertisement
AeGIS 7000S SERIES
2.
Enter 02 then #, the display will show
3.
Enter tenant directory number to be edited then #
Enter new name up to 16 characters then press #
4.
Enter the a new tenant phone number up to 16-digit then press # or
Return to step 3 to edit another tenant directory
Function Code 03 - Delete Tenant Directory
1.
Log-in to programming
2.
Enter 03 then #
3.
Enter the tenant directory to be deleted (0-9) then press #
Function Code 04 - Clear All Tenant Directories
1.
Log-in to programming
2.
Enter 04 then #
3.
Do the following:
- Press 1 (to clear all directories) then press #
- Press * to cancel
Function Code 05 - Call Forwarding
Option 1 must be selected. Default is 1 (enable)
file:///C|/PACH-CO.COM-2018/online_manual/aegis7000s.htm[6/13/2019 7:18:06 AM]
or press
#
without entering anything to keep the existing name
see
Chapter 3
for keypad layout
if directory exists
if directory does not exist
press
#
without entering anything to keep the existing
number.
Advertisement
Table of Contents
