Table of Contents
Advertisement
AeGIS 7000S SERIES
CHAPTER 4
Programming
Log-in to Programming Mode
1. Press 0 and # simultaneously, then release, the welcome screen will stop scrolling.
2. Enter 4-digit master code (default=0000) then press # (if you do not know the master code, see
Function Code 00 - Change Master Code
1.
Log-in to programming
2.
Enter 00 then #
3. Enter new master code then press #
Function code 01 - Add New Tenant Directory
By default the directory digit is set to 3 but it can be changed to 3 or 4 digit. See
1.
Log-in to programming
2.
Enter 01 then #
3.
Enter directory number 0-9
4.
Enter name up to 16 characters
5.
Enter the tenant phone number up to 16-digit
VOIP phones may have problems releasing door)
Return to step 3 to enter another tenant directory
Function Code 02 - Edit Tenant Directory
1.
Log-in to programming
file:///C|/PACH-CO.COM-2018/online_manual/aegis7000s.htm[6/13/2019 7:18:06 AM]
(directory is in single digit and cannot be changed)
see
Chapter 3
for keypad layout
(name can be a person real name, apartment number, etc., directory will be sorted in alphabetical
(phone number can be land line number, cellular number or Voice over IP (VOIP) number. Note: Ocassionally
then press #.
chapter 2 step
function code 19
then #
CALL, ENTER, EXCEPT PROGRAM
8)
order) then press #
Advertisement
Table of Contents
