Function Code 38 System Acknowledge; Function Code 39 Disable And Enable Remote Access - PACH & COMPANY Quantum Q9000iP Series Manual

6. Present the card or fob in front of the black window, the system will register the card or fob 8-digit number printed then press #
7. Enter 1= relay 1(door 1), 2= relay 2 (door 2) or 3= both relay then press #
8. Enter time zone 1-3 then press #
9. Enter 00 (24 hours) - 20 see
10. Enter Sat ID 0-7 then press #
11. Enter
0= no more additional time zone then press # and return to
1= add additional time zone then press # and return to
* = exit programming

Function Code 38 System Acknowledge

The system will answer an incoming call after a number of rings. Sharing the phone line with fax or alarm system, disable this code.
1. Log-in to programming
2. Enter 38 then #
3. Press
0= disable auto answer
1-9= answer in 1-9 rings
then press #

Function Code 39 Disable and Enable Remote Access

If no remote opening allow, disable it using this function code. Default setting is enabled.
1. Log-in to programming
see Chapter 3 for keypad layout
function code 17 then press #
(enter 0 if no satellite connected to the
step 3
step 8
QR5)
to program another temporary code