Table of Contents
Advertisement
R911299722 / 02 | Rexroth IndraControl VCP 20
Safety Instructions for Electric Drives and Controls
3.10
Protection During Handling and Mounting
3.11
Battery Safety
Electric Drives and Controls | Bosch Rexroth AG
Under certain conditions, incorrect handling and mounting of parts and
components may cause injuries.
CAUTION
Risk of injury by incorrect handling! Bodily harm caused by crush-
ing, shearing, cutting and mechanical shock!
• Observe general installation and safety instructions with regard to
handling and mounting.
• Use appropriate mounting and transport equipment.
• Take precautions to avoid pinching and crushing.
• Use only appropriate tools. If specified by the product documenta-
tion, special tools must be used.
• Use lifting devices and tools correctly and safely.
• For safe protection wear appropriate protective clothing, e.g. safety
glasses, safety shoes and safety gloves.
• Never stand under suspended loads.
• Clean up liquids from the floor immediately to prevent slipping.
Batteries contain reactive chemicals in a solid housing. Inappropriate
handling may result in injuries or material damage.
CAUTION
Risk of injury by incorrect handling!
• Do not attempt to reactivate discharged batteries by heating or other
methods (danger of explosion and cauterization).
• Never charge non-chargeable batteries (danger of leakage and ex-
plosion).
• Never throw batteries into a fire.
• Do not dismantle batteries.
• Do not damage electrical components installed in the equipment.
Be aware of environmental protection and disposal! The batteries con-
tained in the product should be considered as hazardous material for
land, air and sea transport in the sense of the legal requirements (dan-
ger of explosion). Dispose batteries separately from other waste. Ob-
serve the legal requirements in the country of installation.
3-9
Advertisement
Table of Contents
