4.3
Mounting CPS21T with swivel/incline adapter
1070 073 826-101 (01.10) GB
The CPS21T is planned for a:
D gallows mounting (e.g.bracket system KSE 60)
via an adjustable swivel/incline adapter.
For this, on the to side of the housing, there is a circular installation opening
(∅ 60 mm with 4 bore holes∅ 5 mm), on which the swivel/incline adapter is
fitted, and through which all cables are lead into the housing .
6
A–A
.
The flange for the gallows mounting must be sufficiently sealed in or-
der to maintain the protection category IP 54.
64
Bm6 (4X)
∅ 60
Bezel 4 x 45_
Installation
4–5
A
Housing cover
Installation ope-
ning
Flange
A