Table of Contents
Advertisement
2-INSTALLATION
INSTALLATION
FOREWORD
The installation position must be chosen according to the room, smoke extraction system and flue. Check with local authorities whether
there are any restrictive regulations in force regarding the combustion air inlet, the smoke outlet system, the flue or the chimneypot. The
manufacturer declines all responsibility in the event of installations that do not comply with the laws in force, incorrect room air exchange,
electrical connection non-compliant with the standards and inappropriate use of the appliance. The installation must be carried out by
a qualified technician, who must issue a declaration of conformity of the system to the purchaser and shall assume full responsibility for
final installation and consequent good operation of the product.
In particular one must ensure that:
• there is a suitable combustion air inlet and smoke outlet in compliance with the type of product installed
• other stoves or devices installed do not cause depression in the room where the product is installed
• when the product is switched on there is no reflux of smoke in the room
• smoke extraction takes place in full safety (sizing, smoke seal, distances from flammable materials...).
We especially recommend to check the data tags of the flue for the safety distances that must be observed in presence
of combustible materials and the type of insulating material to be used. These indications must be followed strictly
to prevent serious harm to people and to the integrity of the home. Installation of the appliance must ensure easy access to
clean the appliance itself, the smoke outlet pipes and the flue. It is forbidden to install the product in rooms with a fire hazard.
Installation in studio flats, bedrooms and bathrooms is only permitted with sealed or closed appliances equipped with
suitable combustion air ducting directly outside. Always maintain adequate distance and protection in order to prevent
the product from coming into contact with water.
In the event there are several appliances installed, the external air inlet must be sized accordingly.
MINIMUM DISTANCES
We recommend installing the stove away from walls and furniture, with a minimum clearance to allow effective aeration of the appliance
and a good distribution of heat in the room. Observe the distances from flammable or heat-sensitive objects (sofas, furniture, wood
panelling, etc.) as specified. The front distance from combustible materials needs to be at least the measurement provided in the product
technical data.
If particularly delicate objects are present, such as furniture, curtains or sofas, increase the product clearance accordingly.
If the floor is made of combustible material, it is recommended to use a protection made of non-combustible material (steel, glass...) that
also protects the front from any falling combusted material during cleaning operations.
The appliance must be installed on a floor with adequate load capacity.
If the existing construction does not meet this requirement, one must take appropriate measures (for example a load distribution plate).
Technical Dept. - All rights reserved - Reproduction prohibited
7
Advertisement
Table of Contents
