Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MCZ Powerbox Compact-Link
Summary of Contents for MCZ Powerbox Compact-Link
- Page 1 INSTALLATION AND USE MANUAL...
- Page 2 MCZ S.p.A. - Via G.Oberdan 86, I - 33097 Vigonovo (PN) Italy. EN 14785 - 2006 Art. 15a B-VG - VKF AEAI POWER BOX Potencia nominal: Potência nominal: 8,5 kW 2,6 kW Nominal heat output: Brændværdi: Emisión CO ( al 13% de O2): Emissão CO (13% de O2):...
-
Page 3: Table Of Contents
SETTINGS TO CARRY OUT BEFORE FIRST LIGHTING ..............31 4.7.1. Setting current day and time ....................31 4.7.2. Setting the temperature unit of measure ..................31 4.8. FIRST LIGHTING ..........................31 4.8.1. Turning on/off from the remote control ..................31 Contents Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... - Page 4 5.2.5. Other checks..........................51 5.2.6. Shutting the stove down (end of season) .................52 5.2.7. Check of internal components ....................52 6. PROBLEMS / CAUSES / SOLUTIONS ....................53 7. ELECTRICAL DIAGRAMS .........................55 Contents Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited...
-
Page 5: Introduction
INTRODUCTION ATTENTION Dear Customer, This warning sign indicates that the We wish to thank you for choosing an MCZ product, message to which it refers should be specifically a stove of the MCZ pellet line. carefully read and understood, because... -
Page 6: Warnings And Guarantee Conditions
• It is inadvisable to base the stove directly on the • Do not touch the stove with wet hands, in view Warnings and guarantee conciliations Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 7: Guarantee Conditions
Damage caused by transport and/or handling is excluded • If it gets lost, ask MCZ or your authorised dealer from the guarantee. for another copy. For installation and use of the product, reference must be made exclusively to the booklet supplied. -
Page 8: Theoretical Notions For Installation
Length: max 30mm Contents: 100% untreated wood, with no added bonding substances (bark percentage 5% max) Packaging: in sacks made from ecologically compatible or biologically decomposing material Theoretical notions for installation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 9: Precautions For Installation
The electrical plug must be positioned where it is always accessible. Otherwise, during installation, provide suitable devices for disconnection for the power supply network compliance with standards on electrical systems Theoretical notions for installation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 10: Operating Area
12 cm diameter or a square hole 10x10 cm), protected by a grille on the inside and the outside. The air intake must also: • communicate directly with the room where the stove is installed Theoretical notions for installation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 11: Connection Of Smoke Discharge Pipe
CONNECT THE FLUE PIPE AND CANNOT ITSELF BE CONSIDERED AS A FLUE PIPE. The flue pipe has the following characteristics described in subsequent paragraphs Example of installation of PowerSystem Theoretical notions for installation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 12: Connection To The Flue Pipe
You must ensure that a windproof cowl should be fitted which complies 1) Windproof cowl with the standards in force. 2) Flue pipe 3) Inspection Theoretical notions for installation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 13: Operating Problems Caused By Draught Defects In The Flue
Hazardous conditions can only be overcome by suitable setting-up of the stove carried out by qualified MCZ personnel. Theoretical notions for installation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 14: Installation And Assembly
* Data that may vary depending on the type of pellets used. **Heatable volume based on demand of cal/m 40-35-30 (respectively 40-35-30 Kcal/h for m Appliance suitable for installation in a shared flue. Installation and fitting Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... - Page 15 * Data that may vary depending on the type of pellets used. **Heatable volume based on demand of cal/m 40-35-30 (respectively 40-35-30 Kcal/h for m Appliance suitable for installation in a shared flue. Installation and fitting Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited...
-
Page 16: Preparation And Unpack Ing
If the product is not anchored to a surface, it runs the risk of loosing its stability. Installation and fitting Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 17: Removal Of Compensation Frame
Before assembling the cladding, execute a test by loading the combustible fuel to make sure that the pellets descend correctly towards the hopper. Installation and fitting Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 18: Side Installation Of Chute
The filter must be regularly services. To reach it, the combustion chamber must be extracted on its slides. To do this, refer to the chapter on maintenance. Installation standard nozzles hood ventilation Installation and fitting Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 19: Hood Ventilation Nozzles
If the Powerbox is inserted in an existing cladding the ventilation grilles on the cladding will be used. If the Powerbox is used as a new installation, MCZ recommends installing the ventilation nozzles as described in paragraph 3.9.2 existing cladding Hood ventilation nozzles for new cladding. -
Page 20: Mask For The Realization Of Holes For The Hood Ventilation Grilles
Mask for the realization of holes for the hood ventilation grilles The drawing below illustrates the positions and dimensions for placement of the ventilation vents of the hood. (1a and 1b) Installation and fitting Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 21: Making The Electrical Connections
3.9. REALIZATION OF CLADDING The product must be fully tested before the cladding is placed. MCZ shall not be held liable for any damage to the cladding if abnormal operation occurs that were not checked before cladding the unit. You MUST check the seal of all tubes where smoke passes (smoke connection, gaskets and insertion in flue pipe) before cladding. -
Page 22: Compensation Frame Assembly
To open or close the door, press on the upper left corner. This simple pressure will attach or detach the door from the closing device on the door frame. Installation and fitting Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 23: Diagram For Creating Holes On The Cladding - Recommended Measurements
Chapter 3 INSTALLATION AND USE MANUAL page 3.15. DIAGRAM FOR CREATING HOLES ON THE CLADDING - RECOMMENDED MEASUREMENTS Installation and fitting Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 24: Operation
(various instructions and adhesive labels). Check that the grate is positioned correctly and rests firmly on the base, and that the fire door closes correctly. Opening of fire door Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 25: Loading Pellets For The Compact Powerbox
Using the provided tool (B), push the pellets towards the Tool B: hopper. Do not place any type of fuel in the hopper other than pellets that are compliant with the specifications provided previously. Fig. 1 Drawer unit Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 26: Loading Pellets For The Link Powerbox
Do not place any type of fuel in the hopper other than pellets that are compliant with the specifications provided previously. Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 27: Lcd Remote Control
6. The MENU button lets you access setting menus for ventilation, SLEEP mode and TIMER 7. Support base that contains the battery compartment 4.5.1. Remote control display 24 h CLOCK AUTO SLEEP PROGRAM Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... - Page 28 In order to change the fan speed, it is necessary to access the menu that allows this adjustment and causes the icon to light up completely. Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited...
-
Page 29: General Characteristics Of The Lcd Remote Control
It is advisable to replace the batteries after the first lighting. It is also advisable to keep a stock of reserve batteries in the home. Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 30: Emergency Panel
G. button to connect the stove to a new remote control (by means of a procedure explained below) TO OPERATE THE STOVE WITH THE REMOTE CONTROL, SELECTOR "D" MUST BE PLACED ON “REMOTE” Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 31: Settings To Carry Out Before First Lighting
This phase may last from 20 to 40 minutes depending on how long the stove was lit and where it is located. Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 32: Note On First Ignition
TEST TEST Once the remote control is working again, remember to put selector "D" back in the "REMOTE" position. Otherwise the stove will disregard inputs from the remote control. Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 33: Operating Mode
Press button 4 on the remote control to select AUTOMATIC mode. This will be shown on the display by the message AUTO. In this Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 34: Changing From Automatic To Manual Mode
Example of operation in ECOSTOP mode If the room temperature detected by the sensor of the remote control is 15°C and the set temperature is 20°C, the stove will Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 35: Activation /De-Activation Of Eco-Stop Mode
This option can be selected simply by again pressing the up arrow button of button 5 once you are at the 5th ventilation speed. The display of the remote control will show the message AUTO under the fan symbol. Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 36: Sleep Function
4.6.1. and 4.6.2. to learn how to set the current date and time. The days of the week are shown on the remote control with the following abbreviations: Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 37: Timer Activation And Selection Of A Programme
ATTENTION! If the timer function is active, the icon will be on in any operating screen The TIMER function can be activated/deactivated whether the stove is on or off. Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... - Page 38 10:00 but the user decides to start it at 9:00, by pressing button 5 the stove will come on. At 10:00, the timer, which was to order start-up, will be disregarded. Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited...
-
Page 39: Timer De-Activation
4.13. PRE-SET WEEKLY AND DAILY PROGRAMMES 4.13.1. Weekly programmes The weekly programmes selected by MCZ and stored in the memory of the remote control were designed to meet the needs of most users who are out of the home during working hours (factory workers, shopkeepers, office workers, shift workers) as well as those who are usually at home (homemakers, senior citizens, etc.). - Page 40 Mo-Fr OFFICE WORKER Sa-Su FACTORY OR Mo-Fr OFFICE WORKER Sa-Su FACTORY OR Mo-Fr OFFICE WORKER Sa-Su Mo-Fr SHIFT WORKER Sa-Su Mo-Sa SHOPKEEPER Mo-Sa SHOPKEEPER COMMERCIAL Mo-Sa ACTIVITY WEEK-END Sa-Su Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited...
-
Page 41: Daily Programmes
Chapter 4 INSTALLATION AND USE MANUAL page 4.13.2. Daily programmes PROGR. HOURS N° Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 42: Practical Example Of Weekly/Daily Programming
18:00 • SUNDAY at home only after 14:00 Based on these times, from the table in paragraph 4.12.2 the daily programmes are selected which best suit this routine. Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... - Page 43 5 to change it. In fact, in the example, the Monday programme is not suitable for Tuesday, because need select programme Therefore, press button 5 to change it. Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited...
-
Page 44: Insertion Of Keypad Lock
To eliminate the signal and restore normal operating conditions, just fill the hopper with pellets. During the pre-alarm phase, which lasts about 20 minutes, if the user does not add pellets, the unit will start Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 45: Synchronization Of Remote Control
FAILURE OF THE SMOKE EXTRACTION FAN If the fan stops, the electronic board shuts off the supply of pellets in good time, and an alarm is displayed. • BREAKDOWN OF THE REDUCTION MOTOR Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 46: Alarm Signalling
The following table summarizes the possible alarms which the stove may signal and corresponding code which appears on the emergency panel. Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... - Page 47 The pellet hopper sensor indicates that fuel is If instead the unit has gone into alarm status due to running out lack of pellets, fill the hopper, cancel the alarm and restart. Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited...
-
Page 48: Exiting Alarm Condition
(it is recommended that this operation conducted specialist technician). Only after the cause of the blockage has been permanently eliminated can another attempt to relight the stove be made. Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 49: Maintenance And Cleaning
ATTENTION! Do not use alcohol. Do not spray the detergent directly onto the glass. MCZ will not be held liable for Cleaning grate pocket damage to the silkscreen printing of the glass if these instructions are disregarded. -
Page 50: Periodic Cleaning To Be Performed By The User
If it is broken it must be replaced Removing the air filter for cleaning Maintenance and cleaning Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 51: Cleaning Of The Heat Exchanger
(smoke intake fan, inspection panels, etc.) must be replaced when smoke connectionAsh collection those parts are removed for maintenance. Check the seal of the compartment Maintenance and cleaning Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 52: Shutting The Stove Down (End Of Season)
Ash drawer ● Glass ● Lower heat exchanger ● Complete exchanger ● Smoke duct ● Door seal ● Air filter ● Flue pipe ● Remote control battery Maintenance and cleaning Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... -
Page 53: Problems / Causes / Solutions
• Check the state of the door gaskets. • Pellets damp or unsuitable. • Change the type of pellet. • Smoke extractor motor broken. • Check the motor and replace if necessary. Problems/Causes/solutions Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... - Page 54 The operations marked in bold type must be carried out by specialised MCZ personnel. The manufacturer refuses to accept any responsibility and the guarantee lapses if this condition is not respected. Problems/Causes/solutions Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited...
-
Page 55: Electrical Diagrams
13. Emergency panel 6. Bulb thermostat 7. Pressure switch N.B. The electrical wiring of the single components includes pre-wired connectors which are of different sizes. Electrical diagrams and spare parts Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited... - Page 56 MCZ S.p.A. Via Guglielmo Oberdan n°86 33074 Vigonovo di Fontanafredda (PN) – ITALY Telephone: 0434/599599 r.a. Fax: 0434/599598 Internet: www.mcz.it e-mail: mcz@mcz.it 89008049 Rev 0 08/2008...
Need help?
Do you have a question about the Powerbox Compact-Link and is the answer not in the manual?
Questions and answers