How To Control The Unit; Master/Slave Function - ACME TV PANEL100 User Manual

functions without any change press MENU button again.
TEMP.
, press the ENTER button to show the TEMP. on the display and the display
To select the
will show the temperature of the unit . To go back to the functions without any changes press the
MENU button again. Hold and press the MENU button for one second or wait for one minute to
exit the menu mode.
Fixture use hours
, press the ENTER button to show FIXTURE USE HOURS on the display and the
To select
display will show the number of working hours of the unit. To go back to the functions press the
MENU button.
Software Version
To select , press the ENTER button to show SOFTWARE VERSION on the display and the
display will show the version of the software of the unit. To go back to the functions press the
MENU button.

4. How To Control The Unit

You can operate the unit in two ways:
1. By master/slave function
2. By DMX controller
You do not need to turn the unit off when you change the DMX address, the new DMX address
setting will take effect immediately.

4.1 Master/Slave Function

By linking the units in master/slave connection, the first unit will be master automatically. You
8C