Daewoo DWD-WD125 Series Service Manual page 40

rum Wa
4-14. Custom Program
1) When pressing custom button for the first time, the memorized program is loaded and shown in display
window.
To identify whether it is a memorized program and if custom button has been pressed, 'CEP' and cycle
time are displayed in turn in '18:88' display window.
Overall time is displayed only when cycle begins with start button.
2) When custom program is temporarily stopped and custom button is pressed again, basic cycle of normal
course is set. Water level and load are set as well.
'18:88' display window shows the overall time.
3) Set values are saved when pressing start button in custom mode.
3) Set values are saved when pressing start button in custom mode.
4) Custom setting is administered in the following order.
- Power on --> custom button on --> course and cycle selection --> start button on ==> saved
4-15. Course Selection Switch
1) Normal course selected by clicking switch once after power is turned on.
2) Per each click after the first, course is selected in the direction of CW or CCW.
3) 18:88 display indicates cycle time of each course.
39