Daewoo DWD-WD125 Series Service Manual page 34

4. Button Functions
4-1. Power
1) This electronic power switch turns on/ off display.
2) Automatic Power Switch Off
① Power is turned off immediately after completion of entire cycles or the selected cycle.
② Power is automatically turned off in 10 minutes if no button control is made after power on.
3) Initial Display for Power Only
① All course LED is turned on
② 18:88 LED displays '---'.
4-2. Start/Pause
1) Normal course begins when pressing button after turning on power S/W.
2) Operation begins by pressing button after setting a program course or automatic course of 11 varieties.
3) If button is pressed during operation, blinking of cycle lamp changes to lighting only and operation
stops. When button is pressed again, operation restarts from the point of temporary suspension.
4) If cycle is changed by controlling button or encoder switch in temporary suspension state, the mode is
changed to the initial mode.
5) Lock is cleared if in the corresponding conditions by judging values of washing temperature sensor or
water level during temporary suspension.
33