Daewoo DWD-WD125 Series Service Manual page 29

rum Wa
2-7. Load Sensing
1) Load Sensing to Determine Water Level
① Load sensing is carried out when selecting Normal. Cotton, Sanitary course.
② Sensing is administered in the dry laundry state before starting of washing cycle.
③ After motor operation at 75 r.p.m for 10sec, load is judged with motor output measured.
2) Load Sensing for B Spin-drying
① Sensing is administered with the laundry wet during the first interim spin-drying after completion of
washing cycle.
② After motor operation at 75 r.p.m for 10sec, load is judged with motor output measured.
③ Base values for B spin-drying unbalance of interim and main spin-drying are selected according to
load measured by sensing.
2-8. Child Lock
① Child lock mode begins by pressing 'Beeper' button during cycle.
② In child lock mode, all buttons, with the exception of power button, are not operated.
③ In child lock mode, cycle display window is lit to show that child lock has been applied. Also, the
remaining time is displayed in '18:88' window.
④ Lock mode is cleared by pressing 'Beeper' button as was done when starting child lock mode.
28