Daewoo DWD-WD125 Series Service Manual page 36

4-5. Soil Level
1) When pressing button, LED is repetitively lit in the order of " Normal → ▼ → High → Off → Light → ▼'
2) Soil level can be selected only when washing cycle is set.
3) Soil level is operated in courses other than 'Drum Cleaning', 'Wool' and 'Speed Wash'.
4) Washing time changes according to the selected soil level.
ex) In case of normal course, water temp. of Warm/Warm and water level of 'low' In the order of Soil
Level 'Light - ▼ - Normal - ▼ - High', washing time changes in the order of '18min - 23min - 28min
- 31min - 33min'.
5) Selection can be changed during cycle after temporary suspension.
6) Overall cycle time is shown in 18:88 display.
4-6. Beeper
1) Beeper button operates in 5 steps.
Changing in the order of 'HIGH--> ▼ --> Low --> ▼ --> Beeper Off'.
2) After change, it is saved in EEPROM.
4-7. Delay Wash
1) Preset time indicates ending time of the entire cycle.
2) When pressing preset button, time changes in the order of 2→ 3→ 4→ ... → 12→ 2.
3) After selecting preset time, cycle change is possible before entering preset mode by pressing start/
temporary stop button.
However, cycle cannot be changed after entering preset mode.
35