Daewoo DWD-WD125 Series Service Manual page 24

2. Composition per Function
2-1. Water Supply
1) Water Temperature Selection
Water supply algorithm differs according to water temperature selected among 5 levels.
In other temperatures, with the exception of cold water, constant temperature control is executed.
Cold water and hot water operation is carried out in turn according to the target temperature.
Water Temp.
Extra Hot/Cold
Hot/Cold
Warm/Warm
Warm/Cold
Cold/Cold
2) For Cold/Cold, valve operation does not change according to temperature and only the time unit of cold
on for 7sec and off for 9sec is set to supply cold water per each unit of 16sec.
① Pre-wash V/V Operation
On for 3sec/ off for 2sec - Twice: Removing residual detergent from water supply box
② During the intial water supply for washing water is received 5mm higher than the set level.
3) How to Insert Bleach
① During Washing
Operation for 12sec after 3-minute washing in wool, delicate and speed wash courses
Operation for 12sec after 5-minute washing in cotton course
Operation for 12sec after skipping soaking and 4-minute of washing in Drum-cleaning course
Operation for 12sec after soaking and 4- minute of washing in Drum-cleaning course
Target Temp.
67℃
35℃
30℃
30℃
-
23
Target 1 Target 2
67℃
39℃
29℃
29℃
-
70℃
36℃
31℃
31℃
-