Eaton Network-M3 User Manual page 137

Trap receivers
3.7.8.4.1 For other settings
For other settings, see the
3.7.8.5 Access rights per profiles
SNMP
3.7.8.5.1 For other access rights
For other access rights, see the
3.7.8.6 Troubleshooting
3.7.8.6.1 For other issues
For details on other issues, see the Troubleshooting section.
3.7.8.7 Save and Restore
SRR section
SNMP snmp
No trap
Information>>>Default settings
Administrator
Information>>>Access rights per
SRR sub section
v1
Enabled — No/Yes
Application name — 128 characters maximum
Hostname or IP address — 128 characters maximum
Port — x-xxx
Protocol — V1/V2C/V3
Trap community — 128 characters maximum
parameters section.
Operator
profiles section.
Settings Sub settings
enabled
port
enabled
communities readOnly
Name
Enabled
readWrite
Viewer
Example
true
Number: refer to default
settings an possible
parameters for constraints.
true
String: refer to default
settings an possible
parameters for constraints.
Contextual help of the web interface – 137
Settings