Dalsa ML-FM-16K07A Manual page 72

clhsDiscovery
CLHS Discovery
Discovery Disabled
Discovery Enabled
Next CLHS Device clhsNext DeviceConfig
Configuration
One cable five lanes
One cable one lane
Two cable one lane
72 •
Selects whether the camera needs to be
commanded to send image data after power
up.
DiscoverDisable POGO (Power On & GO mode) – as soon as
the camera detects a cable it enables its
transmitters and starts sending image data.
DiscoveryEnable Camera waits for LL_Device_ID to be set
before enabling its transmitters. User must
then read XML and all features and then
send an Acquisition Start before the camera
will send image data.
When the camera is next powered up, the
specified CLHS lane configuration will be set
for the camera.
OneCableFiveLanes
OneCableOneLane
TwoCablesOneLane
Appendix A: GenICam Commands
Guru
DFNC
Guru
DFNC