Dalsa ML-FM-16K07A Manual page 41

The trigger signal entering the camera is routed to the sensor and also to each of the output
control features.
The TriggerDelay feature delays the trigger going to the sensor. This delay allows the user to turn
on the LED before exposing the sensor.
Each line can be delayed relative to the previous line using the ExposureDelay feature.
Note: The ExposureDelay feature can only be applied to the second, third or fourth
lines being exposed.
The exposures for each line cannot overlap.
Input Line 1
GPIO Connector
Input Line 2
Output Line 3
Output Line 4
GPIO Connector
Output Line 5
Output Line 6
The outputLinePulseDuration, outputLinePulseDelay, and LineInvert feature allow the user to
control a light strobe source in order to coordinate with the sensor exposure.
Camera Performance and Features
Internal Timing Generation
CLHS Framegrabber
Trigger Activation Debouncer
Trigger Activation Debouncer
Output Line Invert
Output Line Invert
Output Line Invert
Output Line Invert
Figure 19. GPIO block diagram
Exsync
Rotary Encoder
Output Duration
Output Duration
Output Duration
Output Duration
Trigger Delay Linea ML Sensor
Multiply-Divide
Output Delay
Output Delay
Output Delay
Output Delay
• 41