Settings Menu - LifeFitness GO CONSOLE Service Manual

Settings Menu

UNITS:
De nition: Change the unit of measure for speed and distance.
Options: English or Metric
BEEPS:
De nition: This is used to control the beeper status.
Options: Beeps can be turned ON or OFF.
WIRELESS HEART RATE:
De nition: This is used to stop the console from recognizing a telemetry heart rate.
Options: WIRELESS HEART RATE can be turned OFF or ON.
Notes: Use this to help determine if a heart rate problem is contact or telemetry related. This feature works very well for
determining if the environment is creating false heart rate signals that are then being displayed on the console.
Timer:
De nition: This controls if workout time counts up or down.
Options: Time can be turned UP or DOWN.
METS:
De nition: This is used to display METS.
Options: METS can be turned ON or OFF.
PACE (Treadmills Only):
De nition: This is used to control if PACE if displayed in the message center on the treadmills.
Options: PACE can be turned ON or OFF.
RPM (Bikes and Cross-Trainers Only):
De nition: This is used to display RPM on the bikes and cross-trainers.
Options: RPM can be turned ON or OFF.
CONTRAST:
De nition: Changes the contrast of the display
Options: Contrast range is 1-99.
Notes: Use contrast to help improve screen view ability for different height users.
BRIGHTNESS:
De nition: Changes the intensity of the blacklight LED's
Options: Brightness range is 1-10.
Safety Mode (Treadmill and Cross-Trainers Only):
De nition: On the Treadmill, Safety Mode has the treadmill enter a state where the Enter ey must be pressed prior to start-
ing a workout. On the Cross-Trainers, Safety Mode increases the resistance of the brake to maximum after a workout is
completed.
Options: Safety Mode can be turned ON or OFF.
STATISTICS:
De nition: This displays the total hours and accumulated distance on the treadmill.
Options: View total hours and accumulated distance.
Notes: STATISTICS will be reset if the console is ever reprogrammed. This is the only way STATISTICS can be reset. If
hours or miles exceed 9999 a '-' will be displayed.
SOFTWARE VERSION:
De nition: This displays the software version and checksum on the rst screen and if you press Enter, the second screen
displays the software part number and software build date.
Options: None.
35