AUMA SQ 05.2-SQ 14.2 Manual page 3

Part-turn actuators
SQ 05.2 SQ 14.2/SQR 05.2
7.3. Status signals via output contacts (digital outputs) of standard controls
7.4. Signal via fieldbus of standard controls
8. Tests and maintenance..........................................................................................................
8.1. Safety equipment: check
8.2. Internal actuator monitoring with control via standard controls
8.3. Partial Valve Stroke Test (PVST): execute
8.4. Proof test (verification of safe actuator function)
8.4.1. Safe ESD safety operation (Safe OPENING/CLOSING)
8.4.2. SIL fault signal "Actuator monitoring": check
8.4.3. Safe ESD reaction for "Motor protection (thermal fault)" signals: check
8.4.4. Safe ESD reaction to "Limit seating with overload protection" (limit and/or torque eval-
uation): check
8.4.5. Safe ESD reaction to "Forced limit seating in end position" (limit evaluation)
ators with electromechanical control unit: check
8.4.6. Safe ESD reaction for "Forced limit seating in end position" (limit evaluation) for actu-
ators with electronic control unit and limit switches: check
8.4.7. Safe ESD reaction to "Forced torque seating in end position" (torque after limit evalu-
ation): check
8.4.8. Safe ESD reaction for "No seating" (no evaluation of limit and torque): check
8.4.9. Safe STOP function: check
8.4.10. Combination of Safe ESD and Safe STOP function: check
8.5. Maintenance
9. Safety-related figures.............................................................................................................
9.1. Determination of the safety-related figures
9.2. Specific parameters for AC 01.2 controls in SIL version with actuators of SQ. 2 series
10. SIL Certificate.........................................................................................................................
11. Checklists...............................................................................................................................
11.1. Commissioning checklist
11.2. Proof test checklists
11.2.1. Safe ESD safety operation (Safe OPENING/CLOSING)
11.2.2. SIL fault signal "Actuator monitoring"
11.2.3. Safe ESD reaction to "Motor protection (thermal fault)" signals
11.2.4. Safe ESD reaction to "Limit seating with overload protection" (limit and/or torque eval-
uation)
11.2.5. Safe ESD reaction to "Forced limit seating in end position" (limit evaluation)
ators with electromechanical control unit
11.2.6. Safe ESD reaction to "Forced limit seating in end position" (limit evaluation)
ators with electronic control unit and limit switches
11.2.7. Safe ESD reaction to "Forced torque seating in end position" (torque after limit evalu-
ation)
11.2.8. Safe ESD reaction to "No seating"
11.2.9. Safe STOP function
11.2.10. Combination of Safe ESD and Safe STOP
Index........................................................................................................................................
Addresses...............................................................................................................................
SQR 14.2 Table of contents
21
21
23
23
23
23
24
25
26
26
27
for actu- 29
29
30
31
32
33
34
35
35
36
41
42
42
42
42
42
43
44
for actu- 44
for actu- 45
46
46
47
48
49
50
3