Mitsubishi Electric FR-E720-600 Instruction Manual page 149

Types of Monitor Unit
Electronic thermal
relay function load 0.1%
factor
Output current peak
0.01A
value
Converter output
0.1V
voltage peak value
Output power 0.01kW
Input terminal status —
Output terminal
—
status
Cumulative
energization time ∗2,
1h
∗5
Reference voltage
—
output
Actual operation time
1h
∗2, ∗3, ∗5
Motor load factor 0.1%
Cumulative
0.01kWh ∗4
energization power
∗5
PID set point 0.1%
PID process value 0.1%
PID deviation 0.1%
Inverter I/O terminal
—
monitor
Option input terminal
—
status
Option output
—
terminal status
Motor thermal load
0.1%
factor
Inverter thermal load
0.1%
factor
Monitor display and monitor output signal
Pr. 52 Setting
Operation PU
Pr.158 (AM)
panel main Setting
LED monitor
∗1
10 10
∗1
11 11
∗1
12 12
∗1
14 14
∗1 ×
—
∗1 ×
×
20
— 21
×
23
24 24
×
25
52 52
53 53
×
54
× ×
55
× ×
56
× ×
57
61 61
62 62
Terminal AM
Full Scale Value
Displays the thermal cumulative value on
the assumption that the thermal operation
100%
level is 100% (Larger thermal between the
motor thermal and transistor thermal).
Holds and displays the peak value of the
Pr. 56 output power monitor.
(Cleared at every start)
200V class 400V Holds and displays the peak value of the
DC bus voltage value.
400V class 800V
(Cleared at every start)
Rated inverter Displays the power on the inverter output
power × 2
side
Displays the input terminal ON/OFF status
— on the PU.
(Refer to page 149 for DU display)
Displays the output terminal ON/OFF
— status on the PU.
(Refer to page 149 for DU display)
Adds up and displays the energization time
after inverter shipment.
—
You can check the numbers of the monitor
value exceeded 65535h with Pr. 563.
Terminal AM:
—
Output 10V
Adds up and displays the inverter operation
time.
You can check the numbers of the monitor
—
value exceeded 65535h with Pr. 564.
Can be cleared by Pr. 171. (Refer to page
150)
Displays the output current value on the
assumption that the inverter rated current
200% value is 100%.
Monitor value = output power monitor
value/rated inverter current 100 [%]
Adds up and displays the power amount
based on the output power monitor.
—
Can be cleared by Pr. 170. (Refer to page
150)
100%
Displays the set point, measured value and
100% deviation during PID control (Refer to page
238 for details)
—
Displays the ON/OFF status of the inverter
input terminal and output terminal on the
—
operation panel (Refer to page 149 for
details)
Displays the input terminal ON/OFF status
of the digital input option (FR-A7AX E Kit)
—
on the operation panel. (Refer to page 149
for details)
Displays the output terminal ON/OFF
status of the digital output option (FR-A7AY
— E kit) or relay output option (FR-A7AR E
Kit) on the operation panel (Refer to page
149 for details).
Thermal relay
Motor thermal heat cumulative value is
operation level displayed.
(Motor overload trip (E.THM) at 100%)
(100%)
Thermal relay
Transistor thermal heat cumulative value is
operation level displayed.
(Inverter overload trip (E.THT) at 100%)
(100%)
Description
147
4