Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Advantech 8GE(PoE)+2GE+2G SFP
Summary of Contents for Advantech 8GE(PoE)+2GE+2G SFP
-
Page 1: User Guide
User Guide 8GE(PoE)+2GE+2G SFP Colorful LCD Display PoE Switch... -
Page 2: Package Contents
If any part is lost and damaged, please contact your local agent immediately. 1. Introduction Thank you for choosing this PoE Switch. The 8GE(PoE)+2GE+2G SFP LCD Display PoE Switch Provides have 8-10/100/1000Mbps PoE RJ45 Port witch 2-10/100/1000Mbps RJ45 Port and 2-1000Mbps SFP Slot. Its PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered... -
Page 3: Hardware Description
2. Hardware Description 2.1 Front Panel The Front Panel of the PoE Ethernet Switch Consists of Ethernet Ports. The LCD Display and LED indicators are also located on the panel LED indicator Color Function Off: No Power supply. Green Light: Indicates the switch has power. Off: No device is connected to the corresponding port. -
Page 4: Rear Panel
Rear Panel The rear panel of the PoE Switch indicates an AC inlet power socket, which accepts input power from 100 to 240V AC, 50/60HZ. LCD Features The PoE Switch with the function of the LCD display and PoE. The LCD can display the working condition of PoE port not only, still can accurately show the state of each port such as :Output power,Overload,Short circuit,Light load ,Low voltage ,Over voltage High temperature, and so on - 4 -... - Page 5 Not only such visible on the basis of three generations in the second generation increases the color logo, according to the menu button, switch mode, bandwidth display and warning, PD type, PSE power fine-tuning and priority, PoE port switch control, LCD switch. Enhance the LCD viewing angles, smart fan control, language selection and the function of the factory Settings, in turn, as shown in the figure below: See the operation instructions of the screen concretely.
-
Page 6: Desktop Installation
Desktop Installation Install the Switch on a desktop, please attach these cushioning rubber feet provided on the bottom at each corner of the Switch in case of the external vibration. Allow adequate space for ventilation between the device and the objects around it. 3.2.Rack mountable Installation The switch is rack-mountable and can be installed on an EIA-19 inch equipment rack. - Page 7 3.3 Turn on the switch Please plug the power supply into the switch, the internal power system of the switch can Auto-regulate the working power according to the actual input power. When the switch is power on, the power indicator will be light on the front panel of the switch shines.
-
Page 8: Specifications
Specifications Model 8GE(PoE)+2GE+2G SFP Standard IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x,IEEE802.3af, IEEE802.3at 10BASE-T: UTP category 3,4,5 cable (≤100m) 100BASE-TX: UTP category 5 cable (≤100m) Network - Media(Cable) 1000BASE-T: UTP category 5e cable (≤100m) 1000BASE-X: MMF or SMF SFP module(Optional) LCD Display...