Priority Watch For Group Scan - Uniden XTRAK 50 Series Owner's Manual

Operation
Skipping an Active Channel
When paused on an active channel it is not possible to skip this channel
as the recent active channel feature will cause scan to lock back onto
that active channel. Wait for the active channel to become inactive and
SCAN will resume. If you want to avoid an active channel completely,
deactivate SCAN and remove the channel from the scan memory, then
reactivate SCAN.
Priority Channel in GS Mode
In GS mode if SCAN is paused on an active channel that is not the
Priority Channel, and the Priority Channel becomes active, the radio will
switch to the Priority Channel for as long as there is a signal.
2. To deactivate SCAN, press [SCAN] or [MENU].
If SCAN is deactivated while it is tuned to an active channel,
the XTRAK will stay on that active channel.
If SCAN is deactivated while in-between active channels,
the XTRAK will reinstate the last active channel.
NOTE
If SCAN is deactivated when no active channel has been
found, the XTRAK will reinstate the starting channel.

Priority Watch for Group Scan

To switch Priority Watch On/Off;
1. Press [MENU] and then press [
highlighted.
2. Press [MENU] to select the option.
3. Press [ ] or [
4. Press & hold [MENU] to store the setting.
UNIDEN XTRAK 50 Series
] to highlight On or Off.
] or [ ] until 06 Priority Watch is
23
Handheld UHF-CB Transceiver