Operator Troubleshooting; Antenna Connector; Controls And Their Functions - Uniden SUNDOWNER UH-011 Owner's Manual

OPERATOR TROUBLESHOOTING
Should the unit malfunction or not perform properly, the operator should perform the
procedures indicated below:
1. If the transceiver is completely inoperative.
* Check the power cord and fuse.
2. If trouble is experienced with receiving.
* Check OFF/VOLUME control setting.
* Be sure SQUELCH is adjusted properly. Is the radio over-squelched?
* Check to see that the radio is switched to an operational mode.
3. If trouble is experienced with transmitting.
* Check to see that the transmission line (coaxial cable) is securely connected to the
ANTENNA CONNECTOR.
* Be sure that the antenna is fully extended for proper operation.
* Be sure that all transmission line (coaxial cable) connections are secure and free of
corrosion.
1
CONTROLS AND THEIR FUNCTIONS
2
T.CALL
r-'-
I
' '-' ,il
= = = = = '-.' LU
14 .13