Menu Functions; Ctcss / Dcs - Uniden UH220 Series Owner's Manual

Operation | Menu Functions

Menu Functions

00 Squelch
01

CTCSS / DCS

02 Duplex (Rep.)
03 VOX
04 BCL
To use the MENU:
1. Press [MENU] to enter the menu or setting.
2. Press [ ] or [
and then press [MENU].
3. Save setting changes by pressing and holding [MENU].
4. Press & hold [MENU] again, or press [PTT], to exit menu mode.
The radio will exit the menu after 3 seconds if no key is pressed.
Squelch
See Squelch on page 12.
CTCSS / DCS
CTCSS (Continuous Tone Coded Squelch System)
The CTCSS squelch codes allows a group to talk to each other without
hearing other users on the same channel. The group needs to use the
same code. And as there are 50 CTCSS codes available the chances of
nearby users using the same code is unlikely.
DCS (Digital Coded Squelch)
DCS is a digital version of CTCSS. It provides 104 extra, digitally coded
squelch codes that follow after the 50 CTCSS codes. Follow the steps
for changing CTCSS code but select a DCS code as desired.
UNIDEN UH220
] to select the Menu item you want to view,
05 Call Tone
06 Key Beep
07 Roger Beep
08 Backlight Timer
20
Handheld UHF-CB Transceiver