Mounting Of Flue Gas Restriction Plate - Bellfires BEL VBMT-3NG-SB Installation Manual

MOUNTING OF FLUE GAS RESTRICTION PLATE

Depending on the length and shape of the concentric fl ue system and the chimney
construction, you should, if indicated, fit a restriction plate with a certain width (B) into
the ceiling of the combustion chamber.
To do this, see the set-up options as listed in fi gure 13 through 18.
Assembly
restriction
plate
Figure 29: Positioning restriction plate
Bellfi res
Screw fastening (2x)
62 Installation instructions