Table of Contents
Advertisement
Installation
4 4 .2.6
Connect the concentric flue system
1.
2.
4.2.7
Install the flue gas restriction plate
Safety conditions
Procedure
1.
2.
4.2.8
Remove the baffle plate
The appliance is factory supplied with a baffle plate. This baffle plate is located at the top
of the combustion chamber, just before the connection with the concentric flue. The baffle
plate only remains on location, if a restriction plate needs to be mounted. Refer
Safety conditions
Procedure
1.
2.
20
Connect the concentric flue system to the appliance. Use the materials that are
specified in the preparation manual. Do not use any other materials.
Make sure that all mechanical connections of the concentric flue system are correctly
connected.
Caution:
Install the correct restriction plate. An incorrect restriction plate can cause
damage to the appliance.
Remove the door (including glass).
5.2.1
See
.
Install the restriction plate (A) with
the fasteners (B) in the appliance.
Use the restriction plate specified in
the preparation manual. Baffle plate
(C) stays in place when a restriction
plate must be installed. .
Warning:
Always remove the baffle plate if there is no need to mount a restriction
plate!!!
No restriction plate → No baffle plate !!!!!
Failure to remove the baffle plate, if there is no need to mount a restriction
plate, can lead to dangerous situations!
Remove the baffle plate, by
unscrewing two bolts.
Screw the bolts back into the ceiling
of the combustion chamber, after the
baffle plate has been removed.
4.2.7
.
Smart Bell Panorama 45/59
Advertisement
Table of Contents
