Table of Contents
Advertisement
Decrease the temperature
measured by the ambient
temperature sensor by 2°C by
pressing Minus.
In our example the measured
temperature by the sensor goes
from 24°C to 22°C.
2- If the room temperature difference is positive, example:
Set temperature (what you want) = 19°C.
Ambient temperature (what you read on a reliable thermometer) =
21°C.
Difference measured = +2 °C.
Important: Before carrying out the calibration it is recommended to
wait for 4h after the set temperature modification to insure that the
ambient temperature is stabilized.
To correct, proceed as follows:
Sensor temperature = 21°C.
(The measured temperature may
be different due to the location of
the radiator in the room).
Increase the temperature meas-
ured by the ambient temperature
sensor by 2°C by pressing Plus.
In our example the measured
temperature by the sensor goes
from 21°C to 23°C.
To confirm and move to the next setting, press OK. To exit experts set-
tings, press M for 3 seconds.
C
HOICE OF POWER
Important: A number is displayed on the screen. This is the
power of the device. This setting is reserved for the produc-
tion or the installer, so you do not have to do anything. Any
modification would lead to regulation anomalies.
To confirm and move to the
1
next setting, press OK. To exit
experts settings, press M for 3
seconds.
D
ELETING LOGIN INFORMATION
To permanently delete the Wi-Fi® connection information from the product,
follow the steps below.
1
apppears briefly on the
screen.
Press Minus or Plus to select
or
.
= Delete login information.
= Not delete login infor-
mation.
Select
and press OK for 5
2
seconds.
To confirm and move to the next setting, press OK. To exit experts
3
settings, press M for 3 seconds.
R
ESET EXPERTS SETTINGS
To reset advanced settings, proceed in the following order:
1
appears briefly on the
display.
Press Minus or Plus to select
2
Yes or No.
= Reset advanced set-
tings
= Advanced settings not
reset.
24
5 sec.
FR9011480-90-500B-03-22
Advertisement
Table of Contents
