Consumption Indication Accumulated In Kwh, Energy Savings; Child Anti-Tamper, Keypad Lock/Unlock; Day And Time Settings - Supra Dalbeo WiControl 1022 Installation And Operating Instructions Manual

C
ONSUMPTION INDICATION
ACCUMULATED IN KWH
SAVINGS
It is possible to see the estimation of power consumption in kWh since the
last reset of the energy meter.
• Visualization
From the Auto, Comfort, Com-
1
fort+, Eco or Frost protection
mode, press OK.
View the device's energy consumption in kWh since the first power
2
up or the counter reset.
3
Press M or OK to exit and return to the main display.
• Resetting the energy meter
To reset the counter mode,
1
press Minus and Plus for 5
seconds.
2
Press M or OK to exit and return to the main display.
,
ENERGY
• Keypad lock
From the Auto, Comfort, Comfort+,
Eco, Frost protection, or override
mode, to lock the keypad, press si-
multaneously and hold Minus and
Plus for 5 seconds.
appear on the display, the keypad
is locked.
• Keypad unlock
To unlock the keypad, press simultaneously and hold Minus and Plus
for 5 seconds.
The padlock symbol
unlocked.
If the device is on heating standby mode when the the keypad is locked,
you have to unlock it for the next heating on to access the setup.
If your device is connected to the Internet, the current time and day are
automatically saved once the connection is established.
If your device is not connected, set the time and day manually in the fol-
lowing order:
1
sec.
5
2
12
C
HILD ANTI
KEYPAD LOCK
and the padlock symbol
disappears from the display, the keypad is
Important: when the the keypad is locked, only the key
active.
D
AY AND TIME SETTINGS
To access the time and day
settings, press M several
times until the cursor is under
. The time is displayed on
the display.
Press OK to enter the setting.
The hour is flashing, set by
pressing Minus or Plus.
Confirm by pressing OK.
- ,
TAMPER
/
UNLOCK
5 sec.
2
1
FR9011480-90-500B-03-22
is