Holidays Mode; Disconnection (If The Product Is Connected To The Internet); Reset User Settings - Supra Dalbeo WiControl 1022 Installation And Operating Instructions Manual

H
OLIDAYS MODE
You can program an absence period during which your installation will be
protected from frost. At the end of this period, the device will return to
Auto mode. This guarantees you maximum savings during your holidays
and an optimal level of comfort when you return.
appears on the display, press
Minus or Plus to select or
= Holidays mode enabled
= Holidays mode disabled
Press OK to go to the next step.
If you selected in the previous
step, (days) and the number of
days during which the holidays
mode will be applied (01 = 1 day
by default) appear on the display.
Press Minus or Plus to select the
number of days.
Note: You can set up to 99 days.
After that, it is advisable to select
the frost protection mode (see Se-
lection of an operating mode on
page 9).
Tip: It is advisable to set a return date on a day prior to the actual date. In
this way, you will find the right temperature when you return. Example:
if you return from vacation on February 20, schedule a return to February
19 and have the right temperature on your return!
To confirm and move to the next setting, press OK. To exit user settings,
press M for 3 seconds.
the number of days remaining will flash.
Manual stop
At anytime, you can stop the Holidays mode by pressing M or OK. The
device returns to the previous mode (active mode before switching on
the Holiday Mode).
.
1
D
ISCONNECTION
In case:
- If you want to disconnect the product from the Wi-Fi® network without
leaving your network information behind.
- If you want to use the same phone/tablet the next time you log in, you
don't need to go through the login steps again.
and flash alternately on the display.
2
If you wish to disconnect your
product, press and hold OK for 5
seconds.
Otherwise, press briefly OK to
confirm and move on to the next
setting.
On the home display, the
and symbols will have disap-
peared: the device is disconnected
from the network.
If you want to connect your prod-
uct again, see "Wi-Fi® network con-
nection" on page 9.
R
ESET USER SETTINGS
To reset the user settings, proceed in the following order:
appears briefly on the
1
display.
Press Minus or Plus to select
2
Yes or No.

= Reset user settings.

= User settings not reset.
18
(
IF THE PRODUCT IS CONNECTED TO
I )
THE NTERNET
FR9011480-90-500B-03-22