Jeep GLADIATOR 2023 Owner's Manual page 239

WARNING!
ALWAYS drive safely with your hands on the wheel. You
have full responsibility and assume all risks related to
the use of the Uconnect features and applications in
this vehicle. Only use Uconnect when it is safe to do so.
Failure to do so may result in an accident involving
serious injury or death.
Even though the system is designed for many languages
and accents, the system may not always work for some.
NOTE:
It is recommended that you do not store names in your
Favorites phonebook while the vehicle is in motion.
Number and name recognition rate is optimized when
the entries are not similar. You can say "O" (letter "O") for
"0" (zero).
Even though international dialing for most number
combinations is supported, some shortcut dialing number
combinations may not be supported.
Audio Performance
Audio quality is maximized under:
 Low-To-Medium Blower Setting
 Low-To-Medium Vehicle Speed
 Low Road Noise
 Smooth Road Surface
 Fully Closed Windows
 Dry Weather Conditions
 Operation From The Driver's Seat
Performance such as audio clarity, echo, and loudness to
a large degree rely on the phone and network, and not the
Uconnect Phone.
Echo at the far end can sometimes be reduced by lowering
the in-vehicle audio volume.
Phone Voice Commands
Making and answering hands-free phone calls is easy with
Uconnect. When the Phonebook button is illuminated on
your touchscreen, your system is ready. Check
UconnectPhone.com for mobile phone compatibility and
pairing instructions.
Push the Phone button and wait for the beep to say a
command. Here are some examples:
 "Call John Smith"
 "Dial 123 456 7890"
 "Redial" (call previous outgoing phone number)
 "Call back" (call previously answered incoming phone
number)
Did You Know: When providing a Voice Command, push
the Phone button and say "Call", then pronounce the
name exactly as it appears in your phonebook. When a
contact has multiple phone numbers, you can say
"Call John Smith work".
MULTIMEDIA
Voice Text Reply — If Equipped
Uconnect can announce incoming text messages. Push
the VR button or Phone button
1. "Listen" to have the system read an incoming text
message. (Must have compatible mobile phone
paired to Uconnect system.)
2. "Reply" after an incoming text message has been
read.
Listen to the Uconnect prompts. After the beep, re-
peat one of the predefined messages and follow the
system prompts.
PRE-DEFINED VOICE TEXT REPLY RESPONSES
Yes. Stuck in traffic.
Start without
No.
me.
Okay. Where are you?
Are you there
Call me.
yet?
I need
I'll call you later.
directions.
I'm on my way.
Can't talk right
now.
I'm lost.
NOTE:
Only use the numbering listed in the provided table.
Otherwise, the system will not transpose the message.
237
and say:
5
See you later.
I'll be late.
I will be 5 <or
10, 15, 20, 25,
30, 45, 60>
minutes late.
See you in 5 <or
10, 15, 20, 25,
30, 45, 60>
minutes.
Thanks.