Jeep GLADIATOR 2023 Owner's Manual page 107

6. Position both Tonneau Cover latches over the locking
mechanisms (one on each side of the truck bed),
making sure the plastic retainer is correctly seated in
the forward part of the latch.
Correctly Seated Retainer
Incorrectly Seated Retainer
7. Once the rear Tonneau Cover bar is positioned over
the locking mechanism, grab the back of the Tonneau
Cover and push downward on the center to engage
the locking mechanisms. Make sure an audible
"click" from both sides of the Tonneau Cover is heard
to confirm that the latch is completely engaged.
Push Downward To Lock
NOTE:
If desired, the Tonneau Cover can be left in this position
(rear panel folded forward) while the tailgate is closed, or
the tailgate can be raised to the mid-position
GETTING TO KNOW YOUR VEHICLE
Tonneau Cover With Tailgate In Mid-Position
8. Fold the rear panel down; the tailgate can now be
raised and secured in place.
NOTE:
If not leaving the tailgate in the mid-position, the Tonneau
Cover must be closed completely prior to fully closing the
tailgate.
Do not sit on the Tonneau Cover; damage to the cover
page 101.
Ú
and/or cargo will occur.
105
2
CAUTION!