CAUTION / WARNINGS
The housings for the cables for the pins are provided respectively
for cable Ø 9.5÷10 mm and Ø 8.5÷9 mm: this ensures the burner
protection rating (Standard IEC EN60529) for the electrical
panel.
•
To reclose the electrical panel lid, fix the screws (1) with a torque
of about 5 Nm to ensure the correct seal.
To gain access to the control panel (8), slide the transparent door (7)
for a short distance following the direction on the arrow indicated in the
figure exerting slight pressure with a tool (e.g. a screwdriver) following
the arrows' direction and slide it for a short distance to separate it from
the cover.
•
To secure the transparent door on the panel properly, position the
hooks at their hooking points (9), slide the door in the direction
indicated by the arrow and tighten the screws again (10).
CAUTION / WARNINGS
Only professionally qualified personnel may open the burner
electrical switchboard.
15 / 50
0006160331_202310
1
8
7
9
9
9
9
ENGLISH
1
10
10