Led Light - Quickie QS5 X Directions For Use Manual

6.18 LED Light

The optional LED lights are mounted on the frame, and
can be detached for charging.
Switching the lights on:
By pushing the button A on the backside of each housing,
you can cycle through operating-modes of
the LEDs: (Fig. 6.45)
1. Full power mode
2. Low-power mode
3. Off
Remove the lights for charging:
Remove each Light by pushing the button on top of the
housing B, and slide the housing towards the middle of
the wheelchair.
To re-attach the Lights, mount them on the frame-support
and slide towards the outside until you hear a clicking
noise and the housing is locked in place. (Fig. 6.44)
Charge the battery:
Connect the USB-cable supplied with your wheelchair to
the USB C connector (C) on the housing. Use a standard
USB-charger or your Computer´s USB-port to charge the
battery. (Fig. 6.45)
Battery-type: Lithium-Ion
Nominal capacity: 320m Ah
Nominal voltage: 3.7 V
Charging-time: 1 hr.
Battery storage:
Store the LED lights in a dry and cool environment within
a temperature range between -10 to +50°Celsius.
CAUTION!
Never try to open the housing!
Avoid the ingress of liquids or dirt into the LED lights box.
QS5 X
A
34
C
English | Rev. A
Fig. 6.44
B
Fig. 6.45