Controller, Joysticks & Operating Guides; Omni Input Display; Connectors; C.r-Net Joysticks (Led And Color) - Quickie QM-710 Owner's Manual

Q M- 7 1 0/7 1 5 HD/ 7 2 0
A. OMNI INPUT DISPLAY
The Omni is a universal specialty controls interface that accepts signals from many different
types of SIDs and translates them into commands compatible with the PG Drives Technology
RNET control system.
B. CONNECTORS
Mating Connectors
To connect the communication cables:
Holding the connector housing, firmly push the connector into its mate until you can
no longer see the yellow plastic. The connectors are secured using a friction system.
To disconnect the communication cables:
Holding the connector housing firmly, pull the connectors apart.
NOTE–
Do not hold or pull on the cable. Always grip the connector when connecting and discon-
necting.
When the control system is first switched on after a connection, or system component
change, the timer will be displayed while the system checks itself. Then the re-start icon will
be displayed. Switch the control system off and on again to operate,
C. R-NET JOYSTICKS
Controls: LED, and Color Display Joystick
118444 Rev. D
14
15
16 17
IX. CONTROLS, JOYSTICKS & OPERATING GUIDES
LCD
screen
Profile
Joysticks
18
Omni Display
Mode
Navigation
On/Off
LED
Color
JOYSTICK
Power
Module
communication
cable
14
+/-
15
16
17