Table of Contents
Advertisement
6.12 Options – One Hand Operation
One Hand Operation
(Fig. 6.38- 6.38.1)
To propel the chair in a straight line, both handrims must
be used with one hand.
To fold the wheelchair, remove the telescopic bar by
pushing both ends together.
WARNING!
Make always sure that the connections are set properly to
avoid injuries.
6.13 Tray
Tray (Fig. 6.39)
The tray table serves as a surface area. Your dealer must
carry out a one-off adjustment to the therapy tray so that it
matches the seat width. When carrying out a function test,
the user must be sitting in the wheelchair.
6.14 Push Handles
Height-Adjustable Push Handles (Fig.6.40)
These handles are secured with pins to prevent them from
sliding out unintentionally. Opening the quick-release
lever makes it possible to adjust the height of the push
handles to meet your individual needs.
As you move the lever, you will hear a locking mechanism;
you may now easily position the push handle as desired.
The nut on the tension lever determines how tightly the
push handles are clamped into place. If the nut is loose
after adjusting the tension lever, the push handle will also
be too loose.
Turn the push handle from side to side before use to
make sure that it is clamped securely enough into place.
After adjusting the handle height, always clamp the
tension lever securely into place.
DANGER!
If the lever is not secure, it could result in serious injury
when ascending stairs.
QS5 X
Fig. 6.38.1
Fig. 6.39
32
Fig. 6.38
English | Rev. A
Fig. 6.40
Advertisement
Table of Contents
