Table of Contents
Advertisement
6.7 Half Folding Back
Unfolding the backrest:
To put the backrest in the upright position, push the
handles upwards and forwards until they lock in,
(Fig.6.27).
WARNING!
Keep fingers and other items away from the folding
mechanism when the backrest is being folded to
prevent injury or damage to property.
WARNING!
Make sure that the backrest is always locked in
correctly which is supported by the clicking noise.
Not following this could cause serious injury.
Folding the backrest:
The backrest can be folded to make storage of the
wheelchair easier, (Fig.6.28).
CAUTION!
Do not operate under load as this may cause lever to
break.
To fold the backrest, stand behind the wheelchair, press
the two small levers (Fig. 6.28) positioned on each side of
the backrest (just above the armrests). Fold the backrest
down.
6.8 Stabilising bar
Folding stabilising bar
This bar is used to stabilise the backrest.
To be able to fold the wheelchair, the release lever must
be pushed inwards (Fig.6.29) or released and the
stabilising must be flipped downwards. When unfolding
the wheelchair, please make sure that the stabilising bar
is locked into position.
QS5 X
28
Fig. 6.27
Fig. 6.28
Fig. 6.29
English | Rev. A
Advertisement
Table of Contents
