Nortel Meridian 1 Option 11C Upgrade Manual page 82

Page 82 of 224 Upgrade a two-cabinet system with metal cable to Option 11C
Figure 34
Glass fiber-optic cable connection
553-3021-250 Standard 7.00
Insert plug and twist one-half
turn clockwise to lock
25 Install the receiver card in the slot labeled "Fbr Rcvr."
Wind the slack fiber-optic cable around the fiber routing guide one
time.
26 Remove the NTAK04, NTAK05, NTDK72, or NTDK78 power supply
from the old cabinet and install it in the new expansion cabinet.
Connect the power cord to the bottom of the power supply unit.
27 Remove any circuit cards that you want to keep from the old
expansion cabinet and install them in the corresponding slots in
the new cabinet.
April 2000