Page 76 of 224
Upgrade a two-cabinet system with metal cable to Option 11C
Figure 30
Glass fiber-optic cable connection
553-3021-250
Standard 7.00
Glass fiber-optic cable connections
10
Route each fiber-optic cable through the fiber routing guide.
Use an A0632902 (was A0618443) 10 m fiber-optic cable to connect
the main cabinet to an expansion cabinet located within 10 m (33 ft).
You need a glass fiber-optic cable to connect an expansion cabinet
located up to (1.8 mi) from the main cabinet. A local facilities provider
can supply and install glass fiber-optic cable.
Note: Do not staple or twist fiber-optic cable. Do not bend it beyond a
minimum 35 mm bend radius (90° soft bend).
11
Install the new NTDK20 SSC card in its slot (Slot 0).
Store the excess fiber-optic cable on the fiber routing guide.
April 2000