Nortel Meridian 1 Option 11C Upgrade Manual page 28

Page 28 of 224 Upgrade a single-cabinet system to Option 11C
553-3021-250 Standard 7.00
Compare the ISM parameters with the ISM parameters you
printed in Step 3 on page 18. Make any required changes.
g Define the new AUX ID.
The default AUX ID is the security ID provided with the Option
11C. You need to replace it with the previous Option 11 or Option
11E site ID.
h Confirm the information entered and enter the validation
keycodes.
The terminal displays New Installation Information Summary.
Make any necessary changes to the information then enter the
keycodes.
i Complete the software installation when prompted.
If you enter YES, the system reloads (SYSLOAD) to complete the
installation.
16 Wait for the software installation to finish.
17 If the Database Upgrade Tool is in the PCMCIA socket on the
faceplate of the SSC card, remove it.
18 If you have the optional NTDK27 Ethernet cable, connect it to the
expansion connector in the cabinet (see Figure on page 26).
19 If necessary, change the tone and SDI functions.
The NTDK20 SSC card combines many tone functions. Refer to
"Assign TDS/DTR, XTD, and SDI functions" on page 131 for more
information.
20 Load overlay program 43 (LD 43), and perform a data dump (EDD).
—————————— End of Procedure ——————————
April 2000
CAUTION