Nortel Meridian 1 Option 11C Upgrade Manual page 151

Option 11/11E upgrade from Software Daughterboard or PCMCIA
9 Select type of upgrade to perform.
The screen display is as follows:
Meridian 1 Software will be installed.
Select type of upgrade to be performed:
1. Option 11/11E to Option 11C
2. Option 11C New Software Upgrade
3. Option 11C Feature/parameter upgrade
[q]uit, <cr> current menu, [m]ain menu, [h]elp or [?], [p]revious menu
To select Option 11/11E to Option 11C:
a
b
10 Select the feature set to be enabled.
Note: The feature set you select must match the one provided with
keycodes. The following feature set names are examples only.
Example of screen display for feature sets:
Select Feature Set You Wish to Enable:
1. General Business (NTSKxxxx)
2. Enhanced Business (NTSKxxxx)
3. Enterprise (NTSKxxxx)
4. NAS/VNS (NTSKxxxx)
[q]uit, [p]revious, [m]ain menu, [h]elp or [?], <cr> redisplay
Enter Selection:
To select Enhanced Business, for example, type 2 and press <CR>.
Type 1 and press <CR>.
Continue with the next step, Step 10 on page 151.
Option 11C and 11C Mini
Page 151 of 224
Upgrade Procedures Guide