Page 86 of 224
Upgrade an Option 11E with fiber-optic cable to Option 11C
553-3021-250
Standard 7.00
•
fiber routing guide for each cabinet
•
NTDK22 Single Port or NTDK84 Dual Port Fiber Expansion
Daughterboard
•
NTDK79 Single Port or NTDK85 Dual Port Fiber Expansion
Daughterboard
If the expansion cabinet is within 10 m (33 ft) of the main cabinet, use
one of the following Fiber Expansion Daughterboards:
— NTDK22
— NTDK84
If you move the expansion cabinet up to 3 km (1.8 mi) from the main
cabinet, use one of the following Fiber Expansion Daughterboards:
— NTDK24 (Multimode)
— NTDK79 (Single Mode)
— NTDK85 (Dual Port)
•
NTDK23 Fiber Receiver card
If the expansion cabinet is within 10 m (33 ft) of the main cabinet, use an
NTDK23 Fiber Receiver card. If you move the expansion cabinet up to
3 km (1.8 mi) from the main cabinet, use one of the following fiber
receiver cards:
— NTDK25 (Multimode)
— NTDK80 (Single Mode)
•
A0632902 (was A0618443) Fiber-optic cable (only required with the
NTDK22)
Use this cable only with the NTDK22 or NTDK84 daughterboard for
distances up to 10 m (33 ft). You need a duplex glass fiber-optic cable
from a local provider for distances up to 3 km (1.8 mi).
•
Software Daughterboard
You need Release 24 or later software if you are installing dual port
expansion daughterboards as part of the upgrade.
•
NTDK27 Ethernet cable (optional)
•
NTAK1118 Single Port SDI cable for each expansion cabinet (optional).
April 2000