5-2-10. System View
Refrigerant system information (connection information of outdoor and indoor units) can be checked for each TE-200,
TE-50, and TW-50.
Touch [Initial Settings] in the menu bar, and then touch [System View].
Note: This screen shows the information of the units that have been registered to a group and have started up successfully.
Note: The [Controller] setting will appear (only on the TE-200's LCD) when the [System Exp] setting on the [Unit Info.] screen is set
to [Expand]. Switch the [Controller] setting between [AE200] and [Exp1] through [Exp4] to display the information for each
TE-200, TE-50, and TW-50 individually.
Controller
Select [AE] to display the
information for TE-200, and
select [1], [2], [3], or [4] to
display the information for
each TE-50/TW-50.
Outdoor unit address
"Unit address of the main
unit (Unit address of the sub
unit)" will appear.
(1) Switch the [Controller] setting between [AE200] and [Exp1] through [Exp4] to check the system information for
each TE-200, TE-50, and TW-50 individually. (Only on the TE-200's LCD)
WT09304X01
78
Indoor unit address
Unit address of the indoor
units that are connected to
the outdoor unit will appear.