Mitsubishi Electric TRANE TE-50A Instruction Book page 32

[2] Setting the date range for each schedule
Five types of weekly schedules can be set. (One year is divided into the maximum of five periods.)
Note: This setting is "Season Settings" on the LCD.
Note: The weekly schedule date ranges are set for each centralized controller (TE-200/TE-50/TW-50). When the weekly schedule
date ranges are set with Integrated Centralized Control Web, the same settings will be sent to all the centralized controllers
that are control targets of Integrated Centralized Control Web.
(1) In the Schedule settings screen (Month or Week display), click [Weekly schedule].
(2) In the Weekly schedule settings screen, click [Date range].
(3) In the date range settings screen, enter the date ranges in which each weekly schedule (Weekly 1 to 5) will
be effective.
Schedule settings (Month)
Schedule settings (Week)
Note: On the date range setting screen, check the checkbox (
Note: If the "Schedule: Season setting" setting is set to "Not Available" in the initial settings, the date range settings cannot be used.
For initial settings, refer to the Instruction Book (Initial Settings).
WT09304X01
Weekly schedule
Display switching
Switches between
Month and Week.
Weekly schedule
Weekly schedule settings
Display switching
Switches between
Month and Week.
) to disable the date range setting of the checked weekly schedule.
32
Date range
Date range setting
Date range setting
disabled