Setting The Ip Address Of The Pc - Mitsubishi Electric TRANE TE-50A Instruction Book

5-3-3. Setting the IP address of the PC

Follow the instructions below to set the PC's IP address to connect the Integrated Centralized Control Web and
multiple centralized controllers.
The PC's IP address must have the same network address as the TE-200/TE-50/TW-50's IP address.
(1) Click [Control Panel] in the Start menu.
(2) Click [Network and Sharing Center]>[Local Area Connection].
In the [Local Area Connection Status] window, click [Properties].
(3) Click [Internet Protocol Version 4 (TCP/IPv4)] to select it, and click
[Properties].
(4) In the [Internet Protocol Version 4 (TCP/IPv4) Properties] window,
check the radio button next to [Use the following IP address].
Enter the PC's IP address (e.g., [192.168.1.101]) in the [IP address]
field, and enter the subnet mask [255.255.255.0] (unless otherwise
specified) in the [Subnet mask] field.
In the [Default gateway] field, enter the gateway address as necessary.
Note: Consult the system administrator to decide the IP, subnet mask, and
gateway addresses.
Note: Take a note of the IP address, subnet mask, and default gateway
before making changes.
(5) Keep clicking [OK] or [Close] to close all windows.
WT09304X01
82