Main Pcb - Brother MFC-J5335DW Service Manual

(3) Remove the screw (SCREW BIND M3x6) and remove the Tray FG wire (T1).
(4) Remove the screw (SCREW BIND M3x6) and remove the Tray FG wire (LT).
(5) Release all the wiring attached to the Main PCB harness hold L.
(6) Release the two Hooks and remove the Main PCB harness hold L from the Lower
cover.
SCREW BIND M3x6
Tray FG wire (LT)
Tray FG wire (T1)
Hook
Main PCB harness hold L
Hook
(7) Remove the Wireless LAN PCB from the Connector (CN15) of the Main PCB.
CN15
Wireless LAN
PCB
Routing of harnesses: See
Fig. 3-80
Fig. 3-81
4
" Main PCB".
3-78
Lower cover

Main PCB

Confidential