9.43 CR Encoder Strip
(1) Remove the CR encoder strip from the Encoder spring.
(2) Remove the CR encoder strip from the CR frame ASSY.
Note: Take care not to scratch the CR encoder strip. If it is stained or scratched,
replace it with a new one.
Assembling Note: When mounting the CR encoder strip, be sure to mount it in a way
1
Encoder
spring
that the ▲ -marked point comes to the right side (carriage motor
side) and the ▲ mark points up.
CR encoder strip
CR encoder
strip
Fig. 3-118
3-101
2
CR frame ASSY
Confidential