Brother MFC-J5335DW Service Manual page 54

Inkjet mfc
Hide thumbs Also See for MFC-J5335DW:
Table of Contents

Advertisement

Error Message
Jam Front/Rear
Jam Front
Jam Rear
Jam MP Tray
Jam Front/MP Tray
Jam Tray2
Paper Jam
Repeat Jam
Repetitive Paper Jams
Low Temperature
Media is Full
No Caller ID
No Paper Fed
Repetitive No Paper Fed
Out of Fax Memory
Out of Memory
State
Paper jam during duplex-printing
The recording papers are fed in reverse on the
platen when switchback drive is started, triggering
switchback sensor as paper feeding condition.
Defective during duplex-printing
Switchback sensor detects paper feed condition at
out of specified timing during switchback.
Defective during duplex-printing
Registration sensor detects paper feed condition
at out of specified timing during switchback.
Paper jam during duplex ejecting
Recording paper is not able to be ejected since it
is longer than 840 mm when ejecting the paper.
Paper jam during duplex-printing
Registration sensor does not detect paper feed
within specified pulse numbers in the second side
paper re-feed.
Carriage cannot detect origin.
Detected by the CR encoder sensor.
Abnormal stop of head/carriage unit being driven
Caused by paper jam when ink is not discharging
Abnormal stop of head/carriage unit being driven
Caused by paper jam when ink is discharging
Paper jam
Paper width sensor cannot detect leading edge or
width of recording papers.
Paper jam
Registration sensor stays in paper feeding state
even after completion of paper ejection action.
Paper jam
Switchback sensor stays in paper feeding state
even after completion of paper ejection action.
Paper jam
Switchback sensor cannot detect paper feeding
state even papers are fed during printing.
It was detected that the head temperature is the
specified value or less.
It was detected that the machine temperature is
the specified value or less.
The memory in the media slot is full, or there are
999 or more files.
There is no caller ID information.
It is detected that there is no recording paper in
the valid trays for printing.
The memory becomes full.
2-18
Error
Reference
Code
2-24
0D00
2-24
0E00
2-25
1300
2-25
1500
2-26
1800
2-32
3100
2-33
3800
2-34
3C00
2-45
8200
2-45
8400
2-46
8700
2-46
8800
2-36
4300
2-35
4000
---
4.2.9
---
4.10.4
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents