Brother MFC-J5335DW Service Manual page 294

■ Detail description
LCD
Configure the setting for the time until the host time-out at the Job Cancel. The
JB-Can Time
setting value is the second time scale.
Configure the setting for the time until shift to the Sleep Time. Change the setting
Sleep Time
of the Function Menu.
Configure the setting for the print language. Change the setting of the Function
Emulation Menu. When the data includes the ENTER LANGUAGE, the setting becomes
effective. And this setting is ignored.
Configure the setting for the interface release time. The function is in the PC-Print.
Auto I/F Time
When the PC-Scan/Remote-SetUp works on the way, the setting becomes invalid.
Configure the setting for the recording paper type. Effective for the print from the
computer. When set the type of the paper on the computer, the setting becomes
Media Type
effective. And this setting is ignored. The default value is different by the country
setting.
Configure the setting for the drawing size. Does not set the Paper Size of the
Menu, set the drawing size of the PC-Print. When set the size of the paper on the
Paper Size
computer, the setting becomes effective. And this setting is ignored. "Letter" is the
default for the U.S.A. and Canada and "A4" is the default for other countries.
Configure the setting for the print direction. Effective for the print from the
Orientation
computer.
Configure the setting for the ON/OFF of the Auto Form Feed. Effective for the print
Auto FF
from the computer.
Auto FF Time Configure the setting for the TimeOut, when the Auto Form Feed is ON.
Auto LF Configure the setting for the auto line feed.
Auto CR Configure the setting for the auto Carriage Return.
Auto WRAP Configure the setting for the auto CRLF at the print width.
Configure the setting for the skip at the back-end/tip of the paper and add the
Auto Skip
blank space.
Left Margin Configure the setting for the column space at the left end.
Right Margin Configure the setting for the column space at the right end.
Top Margin Configure the setting for the space at the top end.
Bottom Margin Configure the setting for the space at the bottom end.
Lines Configure the setting for the number of the lines in the PCL.
Error Print Configure the setting for the ErrorPrint of the BR-Script3.
Detail description
5-22
Confidential