Adf Document Support - Brother MFC-J5335DW Service Manual

9.14 ADF Document Support

(1) Remove the two Pins and turn the ADF document support to the position shown in
the figure.
(2) Remove the two Bushings and remove the ADF document support from ADF unit.
Bushing
ADF unit
Assembling Note: When mounting a new ADF document support, be sure to attach
< Where to attach the Anti-static brush >
Anti-static brush
Pin
Bushing
2
1
Fig. 3-29
the anti-static brush as shown in the figure below.
Fig. 3-30
3-47
ADF document support
Pin
Bushing
ADF document support
Confidential