Siemens SICHARGE SICHARGE CC AC22 - MID Operating Instructions Manual page 70

Operation
6.3 Charging
Procedure with RFID card
Proceed as follows to end the charging process with the RFID card:
1. Charging point selection: Press the pushbutton below the display and follow the
instructions.
2. Place the RFID card onto the icon for the card reader.
Once the RFID card has been identified, the validity is checked.
3. Charging stops.
The status indicator changes from blue to yellow.
4. The charging cable is now unlocked. Remove the charging cable.
5. Also unplug the connector from the socket of your electric vehicle. Stow away the
provided charging cable. To do this, follow the instructions in the manual for your vehicle.
Procedure with operator app, hotline
Proceed as follows to end the charging process with the operator app or hotline:
1. Charging point selection: Select your vehicle or the charging point in the operator app.
2. The charging cable is released on the charging station side.
The status indicator changes from blue to yellow.
3. Remove the charging cable.
4. Also unplug the connector from the socket of your electric vehicle. Stow away the
provided charging cable. To do this, follow the instructions in the manual for your vehicle.
Procedure for unplugging from the vehicle
Proceed as follows to end the charging process by disconnecting the vehicle:
1. Unlock the charging cable on the vehicle. Follow the instructions listed in your vehicle's
manual.
The status indicator changes from blue to yellow.
2. Remove the plug from the socket of your electric vehicle and the socket of the charging
station.
The status indicator changes from yellow to green.
3. Stow away the provided charging cable. To do this, follow the instructions in the manual
for your vehicle.
70
SICHARGE Operating Instructions MID
Operating Instructions, 02/2023, A5E48573001-AF