Table of Contents
Advertisement
Operation
6.3 Charging
Different versions
The charging process is described for the socket with type 2 charging port.
The procedure is largely identical for the following versions.
• SCHUKO socket type E/F
• Fixed charging cables type 2
Possible deviations in the procedure:
• Plugging and unplugging directly on the charging station
• Connector lock
Start charging
Proceed as follows to start charging:
1. Check if the required charging point is ready for operation: The status LED must light up
green.
2. Use the left or right pushbutton to select the desired charging point.
3. Authenticate yourself at the charging station.
Depending on the operator configuration (configuration via web interface or backend),
these methods are available:
– Hold RFID card in front of the card reader
– Open operator app and scan QR code
Figure 6-4 Authentication
68
SICHARGE Operating Instructions MID
Operating Instructions, 02/2023, A5E48573001-AF
Advertisement
Table of Contents
